主要特点Main features:

Open type vertical heating furnace,tube and flange can pivot and move away from chamber.

开启式立式加热体，炉管法兰可绕轴旋转移出炉腔。

With standard configuration of OD100mm quartz tube and 40T electrical press

标配Φ100mm石英管真空密封，40T电动压力机。

Adopt graphite push rod and mould,at the same time of pressing,heat the powder to common sintering temperature or lower,to get the dender and uniform product after a short time

采用石墨顶杆和石墨模具，在加压的同时使粉末加热到正常烧结温度或更低一些，经过较短时间烧结成致密而均匀的制品。

技术参数Technical Parameters

Power

输入电源

Power rated: 3KW

额定功率：3KW

Voltage

电压

Voltage rated:  AC220V 50/60HZ

额定电压： AC220V 50/60HZ

Working Temperature

工作温度

Max. Temperature: 1200℃ ( 1 hr)

最高温度：1200℃ (1小时)

Continuous working temperature: ≤1150℃

持续工作温度：≤1150℃

Max. heating Rate: ≤10℃/min

最快升温速率：≤10℃/分

Temperature Controller

控温方式

PID automatic control and auto-tune function.

模糊PID控制和自整定调节

30 programmable segments for precise thermal processing.

智能化30段可编程控制

Built-in protection for the over-heated and broken thermocouple. 

超温和断偶报警功能

Heating Elements

加热元件

Resistance wire, Fe-Cr-Al Alloy doped by Mo

电阻丝（掺钼铁铬铝合金）

Temperature Accuracy

控温精度

+/- 1℃

Prosessing tube

炉管

Φ100*460mm

Graphite rod diameter

石墨压杆直径

87mm

Pressure maintain time

保压时间

0-50min

Movable distance

压力行程

50mm

Plunger diameter

活塞直径

87mm

Pressure stability

压力稳定性

≤1MPa/5min

Weight

重量

400kg

Vacuum Flange

真空法兰

Special designed flanges

定制法兰 

Vacuum Pressure

真空压力

1pa can be achieved by mechanical pump

机械泵可达1pa

10^-4 pa can be reached by molecular pump

分子泵可达10^-4pa

Please click the picture below to order vacuum parts

点击下列图片订购真空部件  

Warranty

质保

One year limited warranty with lifetime support (Such consumable parts as tO-rings, etc. are NOT supported by the warranty)

一年质保终身支持（消耗品如O型圈等不在质保范围内）

Warning

注意事项

Graphite must used under anaerobic condition

石墨必须绝氧使用

Considering contact area calculate pressure

计算压强时应考虑接触面积

Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。

Compliance

认证

CE Certified

CE认证

The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost.

可付费进行TUV(UL61010)或CSA认证